|
V.
TUBULAR STATIONARY BATTERIES :- On
successfully achieving our goal in manufacturing and marketing
of Automotive Batteries
and the same is well accepted in the replacement market since
long time. AP&BP stepped in to manufacturing
stationary cells with a flurry of disciplined activity
was witnessed. Attention to detail, stringent quality
control tests, scrutiny of raw-materials, import
of high-tech machinery were some of the steps taken to ensure
a reliable source of power. Highly competent
professionals were hard to meet end user requirement. Technological
expertise and rigid quality control are secrets behind the
success of AP&BP
is one of the manufacturer full range of lead acid
batteries in the country. They are priority list
of quality conscious buyers like Govt. of India, Defense,
Power House Installation, Telephone Exchange, Railway Train
Lighting and etc. Constructional
Features :- AP&BP
Stationery cells are assembled in Hard Rubber Container with
Tubular Positive Plates and Negative pasted flat plates, using
micro porous separators for insulation. These are
supplied complete with inter cell connectors, acid level
indicators plus with a choice of ceramic / aquagen
ordinary vent plugs. Tubular
Positive Plates :- Tubular
Positive Plates are made of spine grids with fine grained
structure. The grids with high corrosion resistance, low
electrical resistance and greater strength. The spine
grids inserted in a polyester bag with active materials.
The Polyester bag having high oxidation and acid
resistance, raptures strength and good porosity with
appropriate mesh size enables the electrolyte to penetrate
freely while acting as an effective retainer for the highly
active materials. Negative
Plates :- Negative
plates are designed to match the power and long life of
the Tubular positive plates. The active materials are
blend of oxide, special additives and expanders which aids
longevity of the battery life. Cell
container is made of high impact resistant polypropylene which
will withstand shock and breakages during service.
Polypropylene has both acid resistant and insulating resistant
properties. Top
Cover :- Made
of Hard Rubber with Vent holes. Separator
:- The
positive element and negative element clubbed
together and inter spread with high quality micro porous PVC
Separators. By virtue of high porosity, low electrical
resistance and excellent oxidation resistance serve as perfect
separation medium. Performance
features :- 1.
Initial Capacity is attained instantaneously or with in a few
cycles.
2. AP&BP Stationary Cells have a
remarkable ability to float successfully on mains for a
long period. This
is a result of care full alloy composition providing high
resistance to
over charging and low
self-discharge characteristics.
3. Rigid quality control measures long life
for AP&BP Stationary Cells.
4. AP&BP Stationery Cells have less
maintenance problems.
5. Stationary Cells have high ratio of power
to volume and weight. Application
:- AP&BP Stationary Cells are used. 1.
Power Station : Stationary Cells ensured
un-interrupted supply of current for operating
remote control and automatic
protection devices. They are used in circuit
breakers,
field rheostat, values and emergency
light. 2.
Telephone Exchange :- Stationary Cells supply
direct current for transmitting, signalling,
switching and power devices. 3.
Emergency Lighting :- Stationary Cells Provides
emergency lighting in hospitals and
public assemblies. 4.
Railways :- Stationary cells are widely used in
railways signalling systems and
telecommunications systems. When
making an enquiries :- Please
furnish the following particulars to enable us to offer
the most suitable cells for your specific requirement. 1)
Number of identical batteries set required.
2) Number of Cells per battery set.
3) Details : If it is proposed to use any of
the cells of the battery at different rates of charge
and discharge.
4) Capacity : In Ampere - Hours at 10 Hrs.
rate and discharge duty of Batteries.
5) Cell designation in accordance with
IS Specification Standards 1651 : 79
6) The proposed method of
working : i.e. charge - discharge, float
working or standby
with or without
trickle charging. ( in case of the float working
the floating voltage and
limits of regulations are
to be indicated.
7) Whether stand are required and if so details
of layout or space available.
8) The proposed location of installation and
proposed details of tests to be conducted.
9) Accessories and Spares required if any.
10) Special condition if any. |
Back
|
Automotive
Batteries ( Hard Rubber )
||
Automotive
Batteries ( P.P. ) ( For New generation vehicles ) ||
Monoblock
Stationary Batteries ( For UPS )
||
Tubular
Industrial Batteries( For Battery operated Pallet Trucks, Fork
Lifts,Stackeretc.) ||
Tubular
Stationary Batteries.( For UPS, Telephone Exchange, Power
Station, Emergency Lighting etc)
||
Designed
& Hosted by Maharashtra Industries Directory
|
